PETform

• produce high quality preforms
• achieve fast cycle time
• consume minimum energy
• minimize mould change time
• repair and service easily
• provide a long and trouble free service life

• Thread splits are locked in position by lock rings before mould closing to minimize wear of thread split tapers on the cavity side for a long flash-less service life of thread splits
• Preform collar is placed inside the thread splits to minimize clamping force requirement and resulting stress on the mould and clamping unit

• Replaceable cavity lock ring; a wear part separated from cavity for inexpensive and easy replacement
• Replaceable gate insert; a wear part separated from cavity for inexpensive and easy replacement
• Cavity never needs to be replaced
• No axial load on cavity allowing the use of lower steel section thickness and faster cooling

• Weight variation across cavities is minimal
• Excellent concentricity between core and cavity for minimum wall thickness variation
• Consistent dimensions across cavities
• Flash-less parting lines
• Good mould life due to perfect matching of components under load

• Permits short injection and hold times
• Resin is exposed to less stress during injection

• Low crystallinity in the gate area of the preform

• Fast and efficient cooling
• Highly resistant to mechanical failure

• Fast and efficient cooling

• Ensures fast and efficient heat exchange between steel and water
• Chilled water pump consumes less energy
• Requires a smaller flow rate pump

• No deterioration of cooling rate over time

• Low pressure drop in water distribution channels resulting in energy conservation
• Less pressure demand on the pump

• Highly wear resistant
• Resistant to plastic deformation and changes in dimensions
• Cryogenic treatment increases wear resistance and toughness beyond what is possible with a conventional hardening process
• Long service life

• Extremely wear resistant to protect surfaces from wear
• Easier ejection with lower ejection forces

• Highly rigid to withstand clamping forces without deformation
• Provides adequate support to stack components
• Extreme resistance to corrosion
• Long service life

• Cores, core lock rings, thread splits, and cavity lock rings can be changed with the mould in the machine, for quick and easy servicing
• Only one chilled water inlet and outlet for each mould section, with distribution channels drilled into the mould base plates, for quick mould change and low probability of water leakages
• Quick coupling connectors for quick mould change

• Permits the use of higher number of cavities for any machine size for higher productivity

• Reduction in spares inventory for a group of moulds
• Easy servicing

• Comprehensive training provided to customer’s technicians in mould and hot runner maintenance as well as PET processing
• Professionally competent company technicians for mould commissioning, and training at the customer’s factory
• Standard wear parts are kept in stock for immediate shipment 

• Husky HyPET 90, 120, 225, 300, 400 & 500 preform machines
• Husky GL 160, 225, 300 & 600 preform machines
• Husky LX160, 225, 300 preform machines
• Husky XL160, 225, 300 & 600 preform machines
• Husky Index 90, 250 & 400 preform machines
• Krauss Maffei PETform 175 & 300 preform machines
• Sipa XForm preform machines
• Netstal PET Line preform machines
• Nissei ASB PM Series preform machines
• Ferromatic Milacron PETline preform machines
• Toshiba PETline preform machines

144 drop Preform Mold (Cavity Section) for Husky HyPET 500 Preform System-

144 drop Preform Mold (Moving Platen Section) for Husky HyPET 500 Preform System-



144 drop Preform Mold for Husky HyPET 500 Preform Machine-




72 cavity Preform Mould for Netstal Preform Machine-




48 drop Preform Mould for Husky Index 250 Preform Machine-



48 cavity Preform Mould set for Husky GL300 Preform Machine-



24 cavity PET Preform Mould set for Nissei ASB PM Preform Machine-










Mould for ASB Nissei PF6-2B Machine-